Quilt Templates - ready made templates for both hand piecing and rotary cutting quilting methods, as well as template plastics to make your own quilting templates Can't find Something? -
 

Bag Accessories • Bias Tools • Cutting Tools • Fabric Treatments • Fusibles • Marking Tools • Needles & Pins • Photo Transfer • Quilt Labels • Rulers • Sewing Aids • Templates • Thimbles • Thread

Quilt Patis
I love English Paper piecing.... but HATE taking out the basting and papers. So when I saw these on Simply Quilts I immediately ordered some. They're die-cut plastic shapes with holes in the middle. You just tack down the corners around the shape - and since you're not going through to the right side you never have to take out the basting. Just stick something pointy in the hole in the plastic and pop the shapes out after you've whip-stitched them together.  Check out these  videos for more information..... Need some patterns?
#npati-h75 60 plastic hexagons with 3/4" sides $21 Cdn.
#npati-h1 50 plastic hexagons with 1" sides $21 Cdn.
#npati-h1.5 40 plastic hexagons with 1 1/2" sides
 
$21 Cdn.
#npati-d1.5 60 plastic diamonds (60º)with 1 1/2" sides
 
$21 Cdn.
#npati-d2 50 plastic diamonds (60º)with 2" sides (perforated so each can make 4 - 1" side diamonds)
 
$21 Cdn.
Mylar Pieces - 4" Apple Core
Want something a bit more challenging than Grandmother's Flower Garden? Do an Apple Core. The directions call for using a glue stick to hold done the inner curves - I found that lacing them up like a corset works just as well.... either way baste the fabric in place, whip stitch together and detach when the unit is surrounded so you can use it again. 50 per package. #NAPCR - $24 Cdn.
Double Wedding Ring
Sharlene Jorgenson's rotary cutting templates from Omnigrid. Comes with eight acrylic templates, adhesive felt grips, step by step instructions and full colour illustrations (33 pages!).

#NDWR - $35 Canadian

Wheel of Mystery
Sharlene Jorgenson's rotary cutting templates from Omnigrid. Comes with acrylic templates, adhesive felt grips, step by step instructions and full colour illustrations.

#NWOM - $22 Canadian

Dresden Plate
Sharlene Jorgenson's rotary cutting templates from Omnigrid. Comes with acrylic templates, adhesive felt grips, step by step instructions and full colour illustrations.

#NOG2253 - $24.75 Canadian

Fan-Tastic
Sharlene Jorgenson's rotary cutting templates.  Comes with acrylic templates, adhesive felt grips, 32 page book with step by step instructions and full colour illustrations.
#NQS32 - $28.50 Canadian

Dresden Flowers by Cheryl Phillips 
Includes an acrylic wedge tool, 10 pages, six block variations and seven project sizes. Easy folding methods allow "no-point" sewing added dimension. #BKpfa04 - $19.25

Mesmerize by Tammy Kelly
Includes full size acrylic templates for use with a rotary cutter, plus pattern to make 66" square wallhanging or throw. (just add or subtract blocks to change the size).
#K-1010 - $
20
Kaleidoscope by Tammy Kelly
Includes full size acrylic template for use with a rotary cutter, plus pattern to make 27" square wallhanging or table topper. (just add or subtract blocks to change the size).
#K-1008 - $15
Angles Aweigh Templates
Its a lot easier to do weird angle blocks if you can rotary cut the weird shapes..... Set of four different sizes..
#NMQT202 - $30 cdn

want the book? Combine and SAVE
Angle Play Blocks book with Angles Aweigh templates - $49 -

Angles Up
Go for even more weird angle templates...
#NMQT203 - $36 cdn

want the book?  Combine and SAVE Angle Play Blocks book + Angles Up templates - $54 -

No-Melt mylar template sheets. - These are good for applique templates. You cut them out finished size, cut your fabric larger and iron the edges of the fabric over the template. Replaces freezer paper.

#NMT-1 - single 9"x12" sheet $2.50 Cdn.
#NMT-3 - 3 sheets - $7.00 Cdn.

 

Template Material

Heavy weight, translucent (its frosted but you can see through it to trace stuff) plastic template material to cut your own templates or stencils

#NTP-10 - 10 sheets 10"x14" $9 Cdn
#NTP-20 - 5 sheets 20"x14" $9 Cdn.
(note: this is so big it has to be mailed as a parcel...so shipping charges will be relatively high unless you're ordering a bunch of other stuff so it all evens out.)

.

Quick Quarter

This little tool lets you draw your diagonal lines and your sewing lines for half square triangles all at once. It comes in 8" and 12" sizes

#NQkQ8 - $3.25 cdn.

#NQkQ12 - $4.50 cdn

Gridded Template Plastic

If you cut your own templates this stuff is great. It's gridded in 1/4" squares so you should be able to get accurate templates easily. They cut easily with regular scissors or cutters and you can write on the plastic with ordinary pens and pencils. 4 - 8 1/2 x 11" gridded sheets plus 2 plain sheets to a package.

#NGTP - $6.50

Easy Dresden

If you're into Dresden plates, or Grandmother's fans, this will let you quickly cut out the pieces with your rotary cutter. Five wedges makes a fan - Twenty a Dresden Plate.....

#Ndres -$8 Cdn

Hexagon

Now you can rotary cut hexagons from 1" to 5" finished size #nhex - $7.75

Stack-n-Whack 15° Fan Ruler

Makes 5" to 12" fan blocks with six wedges per fan - or use it for dresden plate designs. Comes with pattern for throw quilt.

#NBSR15 - $12.50 Cdn
check out the Magic Quilts by the Slice for stack-n-whack fan quilts......


 

Stack-n-Whack 18° Fan Ruler

Makes 5" to 12" fan blocks with five wedges per fan - or use it for dresden plate designs. Comes with pattern for Bow Tie Fans quilt.

#NBSR18 - $14 Cdn


 


Home   FAQ

©Carol Wright 1997 All rights reserved.
Revised: September 08, 2007.