Prices are in Canadian dollars - to convert to another currency
Can't find Something?
- Try
| Rulers
Prices are in Canadian dollars - to convert to another currency |
Can't find Something? |
Omnigrid makes great rulers ......
| Perfect for squaring up half square triangles. It has eighth inches marked so Its good for miniatures. | #NOG4G
 |
4" x 4" | $6.50 Cdn. | ||
| Another handy size - | #NOG45G |
4 1/2" x 4 1/2" | $7.25 Cdn. | ||
| Once you've got the big cuts done, this is easier to use than the 24" ruler. | #NOG14
|
4" x 14" | $13.75 Cdn. | ||
| This ruler has the angles marked. | #NOG6A
|
6" x 6" | $9.50 Cdn | ||
| The basic ruler - the first ruler you should get.... and the one you will always need. | #NOG24
|
6" x 24" | $21 Cdn. | ||
| Great for squaring up 9" (and less) blocks. Angles are marked so you can use it to miter wide borders. | #NOG95
|
9 1/2"
x 9 1/2" |
$14.25 Cdn. | ||
| Great for squaring up 12" (and less) blocks. Angles are marked so you can use it to miter wide borders. | #NOG125
|
12 1/2" x 12 1/2" | $22.25 Cdn | ||
| Great for squaring up 15" (and less) blocks. Angles are marked so you can use it to miter wide borders. | #NOG15
|
15" x 15" | $26 Cdn | ||
.. 
|
Tape - Glow Line
from Omnigrid Transparent fluorescent tape for highlighting lines and shapes on rulers. Will not leave residue on your rulers. Includes 3 colors: Pink, Orange, and Yellow. # OG2102 - $4.75 |
Add-a-quarter.... |
|||
|
Birangle
Ruler #QBIR - $11.25
|
Invisigrip by Omnigrid®Invisi-Grip is
a clear non-slip material that is applied to the underside of rulers
cutting mats and templates. When pressure is applied while rotary
cutting InvisiGrip prevents your ruler from slipping and sliding. Simply
cut to size peel off carrier paper and apply to ruler. #Ninvg - $8 cdn.
|
||||
All
Angle Ruler - I really needed this one day when I
needed to draft an 18 degree wedge for a Grandmother's
fan - This is a large - 12" x 4 1/2" version of
the one you probably had in your geometry set .....#NAAR- $23 Cdn. |
Easy Hex Ruler Cut
fast easy hexagons in 5 sizes - from 1" to 3" sides #NEZHX - $14.75 Cdn
|
||||
Flying Geese x 4 Ruler The ruler wouldn't scan and I figured the
technique was a better illustration anyway. With this
cutie you can quickly make flying geese from 3/4" x
1 1/2" to 3 1/2" x 7" - four at a time
with no wasted fabric. All you need is one big square and
4 small squares. Just follow the ruler and you don't even
have to strain your brain figuring out the sizes. Since
the ruler is set up to cut squares, its super for using
scraps.. Need ideas.... check out
Flying
Geese & More - it's companion book. #NFG4 - $19.95 |
WonderCut Ruler With
this little honey you can whip out half square triangle
(finished size from 1 1/2" to 5")... incredibly
fast. Just pick your size and use the ruler to cut two
strips. Sew them together along both edges. Use the
triangle markings on the ruler to cut half square
triangle units. Bonus - one of the dog ears is already
trimmed...... #NWCut - $18.75 cdn.
|
||||
 8" right triangle with 1/2" grid from Omnigrid - #NOG98 - $ 13.75 Cdn. |
Tri-Recs Tools - to make those Peaky and Spike blocks - $17.25 Cdn - |
||||
Scrapmaster
#NScrap - $14.50 Cdn
-
|
7/8" Ruler You've converted to making half square triangles by
sewing squares on the diagonal but boy is it annoying to try to cut the
necessary eighth inch measurements..... Try this 5 7/8" x 11 7/8"
ruler from Creative Grids.... The solid lines mark the 7/8" lines and
bcause its from Creative grids its got built in grippers to keep it in
place.- #NCGR78 - $16.25 Cdn
|
||||
Dear Jane
Tools These are designed specifically for doing
Dear Jane (or similar quilts). That is 4 1/2" inch
finished size blocks and wedges to fit. #NDJT - $18.50 Cdn
|
|
||||
Lazy Angle Ruler I
REALLY like this ruler. With it you can easily make those
weird spikey blocks without templates. You can do the
same pieces as with the birangle - as well as really
useful square ones.
#nlazy - $19.95
And check out the book
"Lazy
and Loving It"
- 250 Lazy Angle Blocks.......Order
both and save - just $40 cdn.
|
#N10WR - $21 cdn (this ruler is about 25" long)
|
||||
Triangle Duo Another Creative Grids (so it has built in grippers) cutie. With this you can cut 60°. 30° (up to 3 1/2" finished), and 45° triangles (up to 4" finished) $19.50 Cdn
|
Kaleido-Ruler From Marti Michell - another ruler that can cut a variety of triangle types..... this does the bigger ones - triangles up to 8" finished. $21 Cdn |
||||
 Mary Sue's Triangle Ruler Yet another version of the multi triangle cutting tool...... this is the middle sized one and makes triangles up to 6" finished..... $12.25 cdn. |
|
Folding square Ruler Shown is the
folded version.... This is two 6" x 24" rulers with 45° angles - hinged
so that when unfolded you get a perfect mitered corner.... perfect for
squaring up REALLY big things |
|||
|
|
 |
 |
 |
©Carol Wright 1997 All rights reserved.
Revised: January 08, 2008.
